# I hope this 'channel' goes well!

**URL:** <https://www.xrtropolis.one/t/i-hope-this-channel-goes-well/327>\
**Category:** 3dprinters & Mods\
**Created:** [March 14, 2023, 1:44am UTC](https://www.xrtropolis.one/t/i-hope-this-channel-goes-well/327 "2023-03-14T01:44:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Finn](https://www.xrtropolis.one/letter_avatar_proxy/v4/letter/f/e68b1a/32.png) [@Finn](https://www.xrtropolis.one/u/Finn)\
**Post date:** [March 14, 2023, 1:44am UTC](https://www.xrtropolis.one/t/i-hope-this-channel-goes-well/327/1 "2023-03-14T01:44:20Z")

</div>

I’m goign to be looking for help with my 3ed printing. I built an Ender 3 with some nice mods, but then decided to upgrade to the Ender 7 high speed printer. Huge mistake.  
The first one kind of imploded on me on a print job overnight, and the retailer generously sent me a new one while allowing me to keep the broken one. THe replacement printer seemed ok, but it just stopped working properly= I could never get it to actually complete a print, and now it won’t even find center. Man. So Now I have TWO nonfunctional Ender 7s.  
Any Creality experts around?

---

<div class="post-metadata">

**Author:** ![system](https://www.xrtropolis.one/uploads/default/original/1X/b664cdcd68d917252054fb4d0a8b099f57d8e225.png) [@system](https://www.xrtropolis.one/u/system)\
**Post date:** [May 13, 2023, 1:45am UTC](https://www.xrtropolis.one/t/i-hope-this-channel-goes-well/327/2 "2023-05-13T01:45:01Z")

</div>

Closed on May 13, 2023, 1:45am UTC

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.
